Outline
A manual type can receive one PAT. Up-gradable to an auto type, JTD-505 III.

Feature
•Sensitive analysis of wide range from low to high boiling components are realized.
•Curie point heating results in sharper chromatographic peaks.
•The industry's largest capacity quartz sample tube enables large volume of air sampling.
•Small electronic parts can be placed in the empty PAT directly.
•The split can be adjusted at two places; outlet of PAT and SAT.
•Analytical conditions can be stored into method files.
•Can be easily installed on all commercial GC/GC-MS.


Specification
<Device>
♦ PAT Thermal Desorption: -99°C to 350°C
♦ Transfer Line: Room Temp. + 10°C to 300°C
♦ SAT Thermal Desorption: Curie Point heating
♦ SAT: Quartz tube
♦ SAT cooling: Down to -99°C
♦SAT oven: 200°C
♦ Needle: Room Temp. + 10°C to 300°C
♦ GC connection:
Direct connection to capillary column or injection
♦ Dimension/weight:
255 W X 210 H X 130 D (mm)/3.1 Kg

<Controller>
♦ Touch panel:
Setting for each part, temperature control, flow rate, valve switching, etc.
♦ Dimension/weight:
350(W) x 250(H) x 500(D) mm/14Kg
♦ Power supply: 100-115VAC, 50/60Hz, 15A

<Valve unit>
♦ RF power supply: 600 KHz, 48 W
♦ Contents: Valve for split, built-in pressure controller
♦ Dimension/weight:
350(W) x 180(H) x 500(D) mm/15Kg

<Liquid Nitrogen Dewar Vessel and Siphon>
♦ Liquid Nitrogen Dewar Vessel: Internal volume 20 liter
♦ Dimension/weight: 390(OD) mm x 650(H) mm/9.2Kg
♦ Siphon: 1,000mm long, with solenoid valve