Outline
75ml Sample cell enable Large Scale Crushing.
Up to Approx. 15g crushable at a time.

Feature
•Driving crash-speed and time can be easily programmed and previous operation of parameter settings can be stored in memory.
•Large internal volume of 75ml sample cell, 150% larger compared to our previous model.
•Driving noise level and vibration during crushing has been greatly reduced.
•4 x 15ml sample cell is available as an option to enable simultaneous four different sample crashes at a time.
•Sealing device for this new sample cell has greatly improved.
•User friendly operation, maintainability and safety performance has improved .

Specification
♦Crush method: Vertical reciprocating
♦Number of cycles: 500-1400 cycle/min in 7steps
♦Sample Cell: Internal volume 75 ml SUS or Titanium
♦Steel ball: Tungsten carbide
♦Timer: Setting of Pre-cool time and Crash time
♦Dimensions: 540(W) x 575(H) x 620(D) mm
♦Weight: 100kg
♦Power supply: 100V, 3A
♦Safety gear: Emergency stop button, Door interlock

Outline
Maximum of 3 g sample in the JFC-300 cell can be crushed.

Feature
Example of crushable polymer material and the amount.
•Polyacetal, hard PVC, soft PVC, silicone rubber,
  printed circuit board, vulcanized IIR, cellulose, tire,
  etc.
•Maximum of 3 g sample in the JFC-300 cell can
  be crushed.
•For HDPE 1.5 g is the maximum allowed in the
  JFC-300 cell.


Specification
♦Crush method: Vertical reciprocating method
♦Number of cycles: At 50 Hz,
  About 1,250 cycles/minute
  At 60 Hz, About 1,450 cycles/minute
♦Cell: Internal volume 12 ml
♦Dewar vessel: Internal volume 1,000 ml
♦Timer: Setting of pre-cooling time and
  crushing time
♦Power supply: 100 to 115 VAC ± 10%, 2 A (standard)